56G QSFP+ Active Optical Cable


QSFP Active Optic Cables are a high performance, low power consumption, long reach interconnect solution supporting InfiniBand FDR/QDR/DDR/SDR,16G/10G/8G/4G/2G fiber channel , PCIe and SAS. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. Gigalight QSFP AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 14.025Gb/s, providing an aggregated rate of 56Gb/s.

▪ Full duplex 4 channel 850nm parallel active optical cable
▪ Transmission data rate up to 14.025Gbit/s per channel
▪ SFF-8436 QSFP+ compliant
▪ Hot pluggable electrical interface
▪ Differential AC-coupled high speed data interface
▪ 4 channels 850nm VCSEL array
▪ 4 channels PIN photo detector array
▪ Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
▪ Low power consumption
▪ Housing isolated from connector ground
▪ Operating case temperature 0°C to +70°C
▪ 3.3V power supply voltage
▪ RoHS 6 compliant

▪ InfiniBand FDR
▪ 16x Fibre Channel
▪ PCI-e3.0
▪ Proprietary High Speed Interconnections
▪ SAS 3.0

PLC Splitter Module Introduction

Twins Device / Mini Module

The conventional PLC device is a single individual, and the 2 in 1 products packaged two device in a shell, so the volume is more compact,performance index as the same with
common device/micro
This device is not a 2x series PLC but a 2 in 1 device/micro with tow port As shown in the right,the two devices inside can work independently
So one device can splite two kinds of signal light into multipath signal, Saving the space and cost, improve quality at the same time

 Products got through the following experiment
•    Damp Heat(time2000H)
•    Temperature Cycling(time4*100H)
•    High Temperature(time2000H)
•    Low Temperature(time2000H)
•    Thermal Shock(time 20cycling)
•    Mechanical Shock
•    Vibration
•    Cassette module optical cable tensile resistance(70N)
•    Connector cable tensile resistance(70N)
•    Water soakand salt fog
•    Cable torsional
•    Cable side pull


Infiberone SFP Transceiver Programmer 100G CFP Programmer Board

Infiberone SFP Transceiver Programmer, SFP Transceiver Test Tools, SFP Transceiver EVB_test Board, CFP Programmer Board.


With friendly GUI, This board is designed to provide an easy and effective solution for MDIO reading and writing on CFP modules.


▪ MDIO MSA compliant master
▪ Monitoring Interface(DDM)
▪ On-board LEDs show MSA output Alarm states
▪ On-board jumpers for MSA input control signals
▪ Module procedure loaded by JTAG connector
▪ Friendly GUI
▪ 12V power supply


100G transceiver testing CFP/CFP2 and CFP4/QSFP28 using adapters


Infiberone Promotions - 10G SFP+ Tunable 12% off

10G SFP+ Tunable 12% off, only 20pcs.

80km Tunable XFP Optical Transceiver, 10G Tunable XFP Optical Transceiver, 10G Tunable XFP/SFP+, Metro Optical Transceiver. 10G Tunable XFP Optical Transceiver, 10G Tunable XFP/SFP+,Metro Optical Transceiver, Infiberone-Optical Interconnect Technology Innovator.
Skype: infiberone
Web: www.infiberone.com
Email: sales@infiberone.com


Infiberone 100G CFP to QSFP28 Adapter module

The Infiberone 100G CFP to QSFP28 Adapter module is a high performance, hot pluggable, and interconnect solution supporting 100G Ethernet and Telecom. The Adapter converts a CFP MSA interface to 1-port of 100GE QSFP28.

It is compliant with the CFP MSA. Gigalight 100G CFP to QSFP28 Adapter module converts 10 bidirectional 10G channels to 4 bidirectional 25G channels operating at up to 28Gbps per channel. The Adapter supports FEC (Forward Error Correction) function; the user can enable the FEC function through the register configuration.

▪ Compliant to CFP Hardware Specification Version 1.4
▪ Compliant to CFP MSA Management Interface Specification Version 2.2
▪ Converts 10 bidirectional 10G lanes to 4 bidirectional 25G lanes
▪ 1 port QSFP28 TX&RX
▪ Support 100G IEEE 802.3bj NRZ FEC
▪ Transmission data rate up to 28Gbps per channel
▪ OTU4 compatible
▪ MDIO digital diagnostic interface and control capabilities
▪ Power class 1 (<4W max)
▪ Hot pluggable electrical interface
▪ Single 3.3V power supply
▪ Operating case temperature: 0°C ~ +70°C
▪ RoHS 6 compliant (lead free)

▪ 100GBE interconnects, IEEE 802.3ba 100GBASE-LR4(Adapter+QSFP28_LR4), IEEE 802.3bm 100GBASE-SR4(Adapter+QSFP28_SR4)
▪ High-speed core router connections & Datacom/Telecom switch
▪ Data aggregation and backplane applications
▪ Proprietary protocol and density application